homepageour company
about usquality policyvaluesbusiness partners
productssectoral applicationstechnical informationsnewscontact tr
Filiz Plastik Logo

DN and Diameter-Tables

DN (nominal diameter) term is used to inner diameter of pipe. DN-diameter conversion tables must be used to find required outer diameter values with pressure class.

SDR value is obtained by dividing outer diameter of pipe to pipe wall thickness. As pipe wall thickness increases, pressure resistance of pipe increases and SDR value decreases. Pressure resistance of pipes in terms of PN can be determined by using SDR value.

This table (?) is made for items as sheets and rods to give approx. Weight changes with dimensions. Results are calculated to give prior knowledge and may deviate  ±10% than real weights.

Technical data forms include some basic informations regarding products such as density, temperature range, yield strength, Shore D hardness etc. These datas are used for both material selection and for easier comparison between different products.

technical informations

WELDING METHODS DN AND DIAMETER-TABLES TECHNICAL INFORMATION FORMSMATERIAL WEIGHT CALCULATION
Filiz Plastik Logo Negative

menu

homepageour companyproductssectoral applicationstechnical informationscontact

contact

Genel Merkez-Fabrika:
Köseler, KOBİ Osb, 29. Sokak No:39 Dilovası/Kocaeli

Bayrampaşa Şube:
Yeni Doğan Mah. Abdi İpekci Cad. Yeniçeri Sk. No:8 Bayrampaşa / İSTANBUL

+90 212 674 46 47 (pbx)

[email protected]

Google Maps

Copyright 2019 © all rights reserved.

İnternet sayfamızda, kullanımınızı en verimli hale getirebilmek ve kullanıcı deneyimlerinizi geliştirmek amacıyla; çerezlerden yararlanılmaktadır. İnternet sayfamızı kullanarak çerezlerin, Çerez Politikamız ile uyumlu bir şekilde kullanılmasına onay verdiğiniz kabul edilmektedir. Detaylı bilgi almak için Çerez Politikamızı inceleyebilirsiniz.